SST
SST
Matchmarks
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
16.
(a)
(b)
SA2348
17.
(a)
(b)
Z00641
18.
(a)
(b)
Z03859
(c)
HINT:
Measure the plate washer and note down the thickness.
(d)
HINT:
SST
Tag the bearing outer races to show the location for reassem-
FA0751
bling.
19.
−
FRONT DIFFERENTIAL CARRIER (4WD)
REMOVE OIL SEAL AND OIL SLINGER
Using SST, remove the oil seal from the differential carrier.
SST
09308−10010
Remove the oil slinger.
REMOVE REAR BEARING AND BEARING SPACER
Using SST, remove the rear bearing from the drive pinion.
SST
09556−30010
Remove the bearing spacer.
REMOVE DIFFERENTIAL CASE ASSEMBLY
Place matchmarks on the bearing cap and differential car-
rier.
Remove the 4 bolts and 2 bearing caps.
Using SST and a hammer, remove the 2 side bearing
plate washers.
SST
09504−22011
Remove the differential case with the bearing outer races
from the differential carrier.
REMOVE DRIVE PINION FROM DIFFERENTIAL CAR-
RIER
SA−51