Toyota T100 1996 Service Manual page 1436

TR−28
M/T:
Front
Shifting
Key Spring
A/T:
Front
1996 TOYOTA T100 (RM449U)
TRANSFER
Shifting
Key
TF0528
TF0690
SST
TF0553
TF0550
TF0550
− REAR OUTPUT SHAFT
4. M/T:
INSERT HIGH AND LOW CLUTCH HUB INTO HUB
SLEEVE
(a) Install the clutch hub and 3 shifting keys to the hub sleeve.
(b) Install the 2 shifting key springs under the 3 shifting keys.
NOTICE:
Install the key springs positioned so that their end gaps are
not in line.
5. A/T:
INSERT HIGH AND LOW CLUTCH HUB INTO HUB
SLEEVE
Install the clutch hub to the hub sleeve.
6. M/T:
INSTALL HIGH AND LOW HUB SLEEVE ASSEMBLY
(a) Using SST and a hammer, drive in a new key retainer.
SST 09316−60011 (09316−00011)
NOTICE:
Be careful not to deform or damage the key retainer.
(b) Using a press, install the high and low hub sleeve assem-
bly.
7. A/T:
INSTALL HIGH AND LOW HUB SLEEVE ASSEMBLY
Using a press, install the high and low hub sleeve assembly.