Toyota T100 1996 Service Manual page 1510

SA−40
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
6. ASSEMBLE NEW BOOT CLAMPS TO BOTH BOOTS
(a) Make sure the 2 boots are on the shaft groove.
(b) Make sure that the 2 boots are not stretched or contracted
when the drive shaft is at standard length.
Standard length:
481.2 − 491.2 mm (18.945 − 19.339 in.)
(c) Using a screwdriver, bend the clamp and lock with a
screwdriver.
7. CHECK DRIVE SHAFT (See page SA−38)
FA0811
− FRONT DRIVE SHAFT (4WD)