Toyota T100 1996 Service Manual page 1739

SR−32
1996 TOYOTA T100 (RM449U)
STEERING − TILT STEERING COLUMN
13. INSTALL 3 TENSION SPRINGS
14. INSTALL COLUMN UPPER BRACKET AND COLUMN
UPPER CLAMP
(a) Install the bracket with 2 new tapered−head bolts.
(b) Tighten the tapered−head bolts until the bolt heads break
off.
15. INSTALL SLIDING YORK SUB−ASSEMBLY
(a) Align the matchmarks on the sliding york and main shaft.
(b) Torque the bolt.
R04531
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
16. CHECK TILT STEERING OPERATION
(a) Check that there is no axial play at the end of the main
shaft.
(b) With the main shaft in the neutral position, pull the tilt lever
and check that the main shaft rises to the uppermost posi-
tion.
(c) Lower the main shaft, and check that it locks in the lower-
most position.