Toyota T100 1996 Service Manual page 795

1996 toyota t100
Table of Contents

Advertisement

EM−72
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
13.
(a)
(b)
(c)
(d)
(e)
(f)
P15739
14.
(a)
(b)
15.
(a)
(b)
(c)
16.
(a)
(b)
P15094
17.
Connect these hoses:
P15086
ENGINE UNIT
CONNECT WIRES AND CONNECTORS
Push in the engine wire through the cowl panel.
Connect the 4 engine wire clamps
Connect these wires and connectors:
Ground strap to cowl top panel
S
Igniter connector
S
Connect 2 connectors to cowl wire.
Connect 4 connectors to the ECM.
Install the ECM with the 3 bolts.
INSTALL FRONT DOOR SCUFF PLATE AND COWL
SIDE TRIM
Install the cowl side trim with the clip.
Install the front door scuff plate with the 4 screws.
CONNECT GENERATOR WIRE
Connect the generator connector.
Connect the generator wire with the nut.
Connect the wire harness clip to the generator.
CONNECT PS PUMP
Connect the PS pump to the bracket with the 2 bolts.
Torque: 58 N·m (590 kgf·cm, 43 ft·lbf)
Using SST, install the PS pump pulley with the nut.
SST
09960−10010 (09962−01000, 09963−01000)
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
CONNECT HOSES
Fuel return hose
S
Fuel inlet hose
S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF