Toyota T100 1996 Service Manual page 1307

MANUAL TRANSMISSION (R150, R150F)
1996 TOYOTA T100 (RM449U)
− OUTPUT SHAFT
4. REMOVE REVERSE GEAR ASSEMBLY AND 2ND
GEAR ASSEMBLY
(a) Using 2 screwdrivers and a hammer, tap out the snap
ring.
(b) Using a press, remove the reverse gear assembly and
2nd gear assembly.
(c) Remove the needle roller bearing.
Z03548
5. REMOVE REVERSE GEAR, SHIFTING KEY AND
SPRING FROM CLUTCH HUB NO.1
(a) Remove the reverse gear from the clutch hub No.1.
(b) Push the shifting key spring with a screwdriver, remove
the 3 shifting keys and key springs.
Q00888
6. REMOVE HUB SLEEVE NO.2 ASSEMBLY AND 3RD
GEAR ASSEMBLY
(a) Using a snap ring expander, remove the snap ring.
(b) Using a press, remove the hub sleeve No.2 assembly and
3rd gear assembly.
(c) Remove the needle roller bearing.
7. REMOVE SHIFTING KEY AND SPRING FROM HUB
SLEEVE NO.2 ASSEMBLY
Using a screwdriver, remove the 3 shifting keys and 2 springs.
Z03550
MT−27