Toyota T100 1996 Service Manual page 1382

AT−14
A
(A340E Only)
B
A
(A340E Only)
B
A
A
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
Z14779
B
B A
Z18882
AT1369
B
B A
Z18882
B
A
B
B
A
B
Z14778
− VALVE BODY ASSEMBLY
8. A340F:
REMOVE OIL PIPE
Pry up both pipe ends with a large screwdriver and remove the
pipe.
9. REMOVE VALVE BODY
(a) Remove the 17 (or 16) bolts.
Bolt length:
Bolt A: 23 mm (0.91 in.)
Bolt B: 32 mm (1.26 in.)
(b) Disconnect the throttle cable from the cam.
(c) Remove the valve body.
NOTICE:
Be careful not to drop the check ball body and spring.
10. INSTALL VALVE BODY
(a) Align the groove of the manual valve with the pin of the
lever.
(b) Connect the throttle cable cam.
(c) Check the springs into the accumulator pistons are
installed correctly.
(d) Install the 17 (or 16) bolts.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
Bolt length:
Bolt A: 23 mm (0.91 in.)
Bolt B: 32 mm (1.26 in.)
11. A340E:
INSTALL OIL PIPE
Using a plastic hammer, install the 2 pipes into the position, as
shown in the illustration.
NOTICE:
Be careful not to bend or damage the pipes.
Author :
1355
Date :