Matchmarks
Matchmarks
Matchmarks
Matchmarks
1996 TOYOTA T100 (RM449U)
PROPELLER SHAFT
−
REMOVAL
1.
REMOVE FRONT PROPELLER SHAFT
(a)
Place matchmarks on the differential and propeller shaft
flange.
(b)
Remove the 4 bolts, washers and nuts, disconnect the
propeller shaft from the differential.
(c)
M/T:
Remove the 2 bolts, nuts and propeller shaft No.2 dust
cover.
R04437
(d)
Remove the 3 bolts and propeller shaft dust cover.
(e)
Suspend the front side of the propeller shaft.
(f)
Place matchmarks on the transfer and propeller shaft
flanges.
(g)
Remove the 4 nuts and washers.
(h)
Remove the propeller shaft from the transfer.
R04440
2.
REMOVE REAR PROPELLER SHAFT
(a)
Place matchmarks on the differential and propeller shaft
flanges.
(b)
Remove the 4 bolts, washers and nuts, disconnect the
propeller shaft from the differential.
(c)
Remove the 4 bolts and protector.
R04441
(d)
Remove the 2 mounting bolts and center support bearing.
(e)
Place matchmarks on the transfer and propeller shaft
flanges.
(f)
Remove the 4 nuts and washers, and the propeller shaft.
R15508
PROPELLER SHAFT ASSEMBLY (4WD)
PR−11
PR01N−01