Toyota T100 1996 Service Manual page 1407

1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
3.
Temporarily mount the torque converter clutch to the drive
plate.
Set up a dial indicator, measure the torque corverter clutch
sleeve runout.
If runout is not within the specification, try to correct by reorient-
ing the installation of the converter clutch.
AT4184
HINT:
Mark the position of the converter clutch to ensure the correct
installation.
− TORQUE CONVERTER CLUTCH AND DRIVE PLATE
MEASURE TORQUE CONVERTER CLUTCH SLEEVE
RUNOUT
Maximum runout: 0.30 mm (0.0118 in.)
Author :
AT−39
Date : 1380