Transfer Unit - Toyota T100 1996 Service Manual

Breather Hose
Transmission Side
1996 TOYOTA T100 (RM449U)
TRANSFER

TRANSFER UNIT

REMOVAL
1.
HINT:
At the time of installation, shift the 2 shift fork shafts to the H4
position.
2.
Disconnect the breather hose from transfer upper cover and
transmission control retainer.
Transfer Side
TF0626
3.
Remove the 2 bolts and dynamic damper.
TF0633
4.
Remove the 4 bolts and engine rear mounting from the trans-
mission.
TF0655
5.
(a)
(b)
(c)
HINT:
Take care not to damage the adaptor rear oil seal with the trans-
TF0654
fer input gear spline.
− TRANSFER UNIT
REMOVE TRANSFER WITH TRANSMISSION
M/T (See page MT−7)
A/T (See page AT−34)
A/T:
REMOVE BREATHER HOSE
Hose depth: 13 mm (0.51 in.) or more
REMOVE DYNAMIC DAMPER
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
REMOVE ENGINE REAR MOUNTING
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
REMOVE PROPELLER SHAFT UPPER DUST COVER
AND TRANSFER FROM TRANSMISSION
Remove the dust cover bolt from the bracket.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
Remove the transfer adapter rear mounting bolts.
Pull the transfer straight up and remove it from the trans-
mission.
Author :
TR−3
TR0CY−02
Date : 1383