Toyota T100 1996 Service Manual page 1194

Magnetic Finger
1996 TOYOTA T100 (RM449U)
STARTING (3RZ−FE) −
3. REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the clutch
shaft hole.
P04515
4. REMOVE BRUSH HOLDER
(a) Remove the 2 screws, 2 O−rings and end cover from the
field frame.
Torque:
1.2 kW, 1.4 kW type: 1.5 N·m (15 kgf·cm, 13 in.·lbf)
1.8 kW, 2.0 kW type: 3.8 N·m (39 kgf·cm, 34 in.·lbf)
(b) Remove the O−ring from the field frame.
HINT:
At the time of assembly, please refer to the following items.
P14945
Use a new O−ring.
(c) Using a screwdriver hold the spring back and disconnect
the brush from the brush holder.
Disconnect the 4 brushes, and remove the brush holder.
5. REMOVE ARMATURE FROM FIELD FRAME
P04525
STARTER
ST−5