Toyota T100 1996 Service Manual page 865

SST
Magnetic Finger
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
DISASSEMBLY
1.
(a)
(b)
(c)
2.
Pull out the valve lifter and shim by hand.
HINT:
P20845
Arrange the valve lifters and shims in correct order.
3.
(a)
(b)
P20847
(c)
P20988
(d)
HINT:
Arrange the valves, valve springs, spring seats and spring re-
tainers in the correct order.
P20841
− CYLINDER HEAD
REMOVE CAMSHAFT HOUSING PLUGS
Remove the bolt, nut, cylinder head rear plate and ground
strap.
Remove the 2 bolts and camshaft bearing cap.
Remove the housing plug.
REMOVE VALVE LIFTERS AND SHIMS
REMOVE VALVES
Using SST, compress the valve spring and remove the 2
keepers.
SST 09202−70020 (09202−00010)
Remove these parts:
Spring retainer
S
Valve spring
S
Valve
S
Using needle−nose pliers, remove the oil seal.
Using compressed air and a magnetic finger, remove the
spring seat by blowing air.
EM−37
EM06M−03