Toyota T100 1996 Service Manual page 1160

IG−2
CORRECT
1996 TOYOTA T100 (RM449U)
IGNITION (3RZ−FE)
2. INSPECT HIGH−TENSION CORDS
(a) Disconnect the MAF meter connector and IAT sensor
connector.
(b) Loosen the hose clamp, disconnect the air cleaner hose
from the intake air connector.
(c) Remove the air cleaner cap and MAF meter assembly.
(d) Disconnect the air hose (for IAC) from the air connector.
(e) Remove the 2 bolts.
(f) Loosen the hose clamp, disconnect the intake air connec-
tor from the throttle body.
(g) Disconnect the high−tension cords from the spark plugs.
NOTICE:
WRONG Pulling on or bending the cords may damage the conductor in-
side.
P23501
(h) Disconnect the high−tension cords from the ignition coils.
(1)
(2)
NOTICE:
S Pulling on or bending the cords may damage the conduc-
tor inside.
S Do not wipe any of the oil from the grommet after the high−
tension cord is disconnected.
− IGNITION SYSTEM
Using a screwdriver, lift up the lock claw and discon-
nect the holder from the distributor cap.
Disconnect the high−tension cord at the grommet.
Author :
1142
Date :