Toyota T100 1996 Service Manual page 1696

1996 TOYOTA T100 (RM449U)
BRAKE − ABS ACTUATOR
(d) Depress the brake pedal and hold it until the step (g) is
completed.
(e) Push the POWER SWITCH, and check that the brake
pedal does not go down.
NOTICE:
Do not keep the POWER SWITCH pushed down for more
than 10 seconds.
(f) Release the switch, and check that the pedal goes down.
R07779
(g) Push and hold in the MOTOR switch for a few seconds,
and check that the pedal returns.
(h) Release the brake pedal.
R07780
(i) Push and hold in the MOTOR switch for a few seconds.
(j) Depress the brake pedal and hold it for about 15 seconds.
As you hold the pedal down, push the MOTOR switch for
a few seconds. Check that the brake pedal does not pul-
sate.
(k) Release the brake pedal.
5. INSPECT FOR OTHER WHEELS
(a) Change the connection of the actuator checker (SST) to
the sub − wire harness E (SST) − from the sub − wire har-
R07781
ness MAIN connector to the SUB connector, or vice ver-
sa.
(b) Repeating (c) to (i) of the step 4, check the actuator opera-
tion same way.
6. INSPECT FOR REAR WHEEL
(a) Turn the selector switch to the "REAR" position.
(b) Push and hold in the MOTOR switch for a few seconds.
(c) Depress the brake pedal and hold it until the step (g) is
completed.
R07782
Author : Date :
BR−59
1664