Toyota T100 1996 Service Manual page 1635

1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
(e) Bend the spring clip.
Using a hammer, bend the spring clip into the position.
R04069
3. REPLACE SPRING BUMPER
(a) Remove rear wheel.
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
(b) Remove spring bumper.
(1)
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
HINT:
At the time of installation, install the spacers, as shown in the
W00479
illustration.
(2)
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
HINT:
At the time of installation, install the spacers, as shown in the
illustration.
W00480
− REAR LEAF SPRING
STD 0.5 ton, Extra cab:
Remove the 2 bolts, spring bumper and spacers.
STD 1.0 ton:
Remove the 2 bolts, spring bumper and bumper
block spacers.
SA−165