Toyota T100 1996 Service Manual page 1317

MANUAL TRANSMISSION (R150, R150F)
1996 TOYOTA T100 (RM449U)
− COUNTER GEAR AND REVERSE IDLER GEAR
4. INSPECT SHIFT FORK AND HUB SLEEVE CLEAR-
ANCE
Using a feeler gauge, measure the clearance between the hub
sleeve and shift fork.
Maximum clearance: 1.0 mm (0.039 in.)
If the clearance exceeds the maximum, replace the shift fork or
hub sleeve.
WM0066
5. INSPECT REVERSE IDLER GEAR RADIAL CLEAR-
ANCE
Using a dial indicator, measure the reverse idler gear radial
clearance.
Standard clearance:
0.040 − 0.082 mm (0.0016 − 0.0032 in.)
Maximum clearance:
0.130 mm (0.0051 in.)
If the clearance exceeds the maximum, replace the reverse
Q01803
idler gear or reverse idler gear shaft.
6. INSPECT REVERSE IDLER GEAR AND SHIFT ARM
CLEARANCE
Using a feeler gauge, measure the clearance between the re-
verse idler gear and shift arm.
Standard clearance:
0.05 − 0.35 mm (0.0020 − 0.0138 in.)
Maximum clearance:
0.50 mm (0.0197 in.)
If the clearance exceeds the maximum, replace the shift arm or
Q06775
reverse idler gear.
MT−37