Toyota T100 1996 Service Manual page 982

MF−18
1996 TOYOTA T100 (RM449U)
MFI (3RZ−FE) − INJECTOR
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE AIR CLEANER CAP, MAF METER AND RES-
ONATOR
(a) Disconnect the MAF meter connector, IAT sensor con-
nector and wire clamp.
(b) Loosen the air cleaner hose clamp.
(c) Loosen the 4 clips, and remove the air cleaner cap, MAF
meter and resonator.
3. M/T:
DISCONNECT ACCELERATOR CABLE FROM
THROTTLE BODY
4. A/T:
DISCONNECT THROTTLE AND ACCELERATOR
CABLES FROM THROTTLE BODY
5. REMOVE INTAKE AIR CONNECTOR
(a) Disconnect the 2 air hoses.
(b) Remove the 2 bolts, hose clamp and intake air connector.
6. REMOVE NO. 1 AND NO. 2 PCV HOSES
7. DISCONNECT HIGH−TENSION CORDS FROM SPARK
PLUGS
NOTICE:
Pulling on or bending the cords may damage the conductor
inside.
Disconnect the distributor connector.
8. REMOVE THROTTLE BODY (See page MF−28)
9. REMOVE DELIVERY PIPE AND INJECTORS
SF1QI−01