Toyota T100 1996 Service Manual page 1162

IG−4
1996 TOYOTA T100 (RM449U)
IGNITION (3RZ−FE)
(c) Using a spark plug cleaner or wire brush, clean the spark
plug.
IG0152
(d) Check the spark plug for electrode wear, threads damage
and insulator damage.
If abnormal, replace the plugs.
Recommended spark plugs:
ND: K16R−U
NGK: BKR5EYA
P03783
(e) Carefully bend the outer electrode to obtain the correct
electrode gap.
Correct electrode gap: 0.8 mm (0.031 in.)
(f) Using a 16 mm plug wrench, install the spark plug.
Torque:
(g) Connect the high−tension cords to the spark plugs.
P03792
NOTICE:
Check that the holder is correctly installed to the grommet
CORRECT
and ignition coil as shown in the illustration.
(h) Check that the lock claw of the holder is engaged by lightly
pulling the holder.
4. INSPECT IGNITION COIL
NOTICE:
WRONG
"Cold" and "Hot" in these sentences express the tempera-
ture of the coils them selves.
P04690
"Cold" is from − 10 °C (14 °F) to 50 °C (104 °F) and "Hot"
is from 50 °C (104 °F) to 100 °C (212 °F)
(a) Disconnect the distributor connctor.
(b) Remove the distributor cap.
(c) Remove the rotor.
(d) Remove the ignition coil dust cover.
− IGNITION SYSTEM
20 N·m (200 kgf·cm, 14 ft·lbf)
Author :
1144
Date :