Toyota T100 1996 Service Manual page 1102

Clearance
1996 TOYOTA T100 (RM449U)
COOLING (3RZ−FE)
S
P14899
6.
(a)
(b)
(c)
P14860
(d)
HINT:
Tank
On radiators with resin tanks, these is a clearance between the
Core Plate
core plate and tank plate where a minute amount of air will re-
main, giving the appearance of an air leak when the radiator is
submerged in water. Therefore, before performing the water
Tank Plate
leak test, first swirl the water around in the radiator until all air
bubbles disappear.
O−Ring
7.
CO0035
HINT:
If the water leak test checks out okay, allow the radiator to dry
completely and then paint the tank plate.
− RADIATOR
The points shown in the illustration cannot be staked with
the SST. Use pliers and be careful not to damage the core
plates.
M/T:
CHECK FOR WATER LEAKS
Tighten the drain plug.
Plug the inlet and outlet pipes of the radiator with SST
SST 09230 − 01010 (09231 − 00060, 09231 − 01010,
09231 − 01020, 09231 − 01030)
Using a radiator cap tester, apply pressure to the radiator.
Test pressure:
147 kPa (1.5 kgf/cm
Check for water leaks.
M/T:
PAINT TANK PLATE
2
, 21 psi)
CO−19