170 mm
(6.70 in.)
1996 TOYOTA T100 (RM449U)
BRAKE
DISASSEMBLY
1.
REMOVE CYLINDER BOOT SET RINGS AND BOOTS
Using a screwdriver, remove the 4 cylinder boot set rings and
4 boots.
BR2008
2.
REMOVE PISTONS FROM CYLINDER
(a)
Prepare the wooden plate to hold the pistons.
50 mm
(1.97 in.)
16mm
(0.63 in.)
BR0212
(b)
Place the plate between the pistons and insert a pad at
one side.
(c)
Use compressed air to remove the pistons alternately
from the cylinder.
CAUTION:
Do not place your fingers in front of the pistons when using
compressed air.
BR0213
3.
REMOVE PISTON SEALS
Using a screwdriver, remove the 4 seals from the cylinder.
BR2009
−
FRONT BRAKE CALIPER (4WD)
BR−35
BR09F−01