Toyota T100 1996 Service Manual page 1634

SA−164
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
REPLACEMENT
1. REPLACE BUSHING
Using a socket wrench and press, replace the bushing.
R06802
2. REPLACE LEAF SPRING
(a) Bend to open the spring clip.
Using a chisel and hammer, pry up the spring clip.
SA0617
(b) Remove the center bolt.
Hold the spring near the center bolt in a vise and remove
the center bolt.
FA0157
(c) Replace the spring clip.
(1)
(2)
Z03060
(d) Install the center bolt.
(1)
(2)
Torque: 44 N·m (450 kgf·cm, 33 ft·lbf)
FA0160
− REAR LEAF SPRING
Drill off the head of the rivet and drive it out.
Install a new rivet into the holes of the leaf spring
and clip. Then rivet with a press.
Align the leaf spring holes and secure the leaves
with a vise.
Install the spring center bolt.
SA0IF−01