Toyota T100 1996 Service Manual page 1524

SA−54
SA0331 SA0332
SST
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
REPLACEMENT
SST
1.
(a)
R04465
(b)
SST
R04348
2.
(a)
(b)
Z03857
(c)
SST
SA0358
R04655
− FRONT DIFFERENTIAL CARRIER (4WD)
REPLACE COMPANION FLANGE DUST DEFLECTOR,
IF NECESSARY
Using SST and a press, remove the dust deflector.
SST 09950−00020
Using SST and a press, install a new dust deflector.
SST 09636−20010
REPLACE SIDE GEAR SHAFT, IF NECESSARY
Remove the clutch hub.
(1) Using a snap ring expander, remove the snap ring.
(2) Remove the clutch hub from the side gear shaft.
Remove the LH side gear shaft from the tube.
(1) Remove the 3 bearing retainer bolts.
(2) Remove the side gear shaft from the tube.
Replace the LH side gear shaft bearing and dust cover.
(1) Using a snap ring expander, remove the snap ring.
(2) Using SST and a press, remove the bearing.
SST 09950−00020
(3) Remove the bearing retainer.
(4) Using a screwdriver and hammer, remove the dust
cover.
(5) Using SST and a press, install a new dust cover.
SST 09316−20011
(6) Install the bearing retainer.
SA0G7−02