Toyota T100 1996 Service Manual page 1167

1996 TOYOTA T100 (RM449U)
IGNITION (3RZ−FE) − DISTRIBUTOR
4. REMOVE SIGNAL GENERATOR (PICKUP COIL)
(a) Remove the 2 screws.
NOTICE:
At the time of reassembly, please refer to the following
items.
Be sure that the wires do not contact with the signal
S
rotor.
Align the rotor tooth with the pickup coil.
S
Using a thickness gauge, set the air gap and tighten
S
the 2 screws.
Air gap: 0.2 − 0.4 mm (0.008 − 0.016 in.)
(b) Remove the signal generator (pickup coil) from the distrib-
utor housing.
5. REMOVE CONDENSER
Remove the screw and condenser.
IG−9