AT−22
Casing Cap
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
DISASSEMBLY
1.
2.
Remove the nut, bolt and shift lever sub−assembly.
Q06988
3.
Loosen the casing cap and remove the parking lock cable as-
sembly and spring.
Q02712
4.
(a)
CAUTION:
Be careful when tapping out the slotted spring pin so that
the spring and control select shaft do not fly out.
(b)
Q02711
5.
(a)
(b)
(c)
D10995
−
SHIFT LOCK SYSTEM
REMOVE 3 CLAMPS
REMOVE SHIFT LEVER SUB−ASSEMBLY
REMOVE PARKING LOCK CABLE ASSEMBLY
REMOVE SHIFT LEVER PLATE SUB−ASSEMBLY,
CONTROL SELECT SHAFT AND SPRING
Using a pin punch and hammer, tap out the slotted spring
pin and control select shaft.
Remove the shift lever plate sub−assembly.
REMOVE CONTROL SHAFT SUPPORT SUB−
ASSEMBLY
Using a snap ring expander, remove the snap ring.
Remove the plate washer, bushings and control shaft
support sub−assembly.
Remove the shift lock plate stopper.
AT027−02