Clutch Unit Removal - Toyota T100 1996 Service Manual

CL−16
1996 TOYOTA T100 (RM449U)
Matchmarks
Q06639
Q06637
CLUTCH − CLUTCH UNIT
REMOVAL
1. REMOVE TRANSMISSION FROM ENGINE
W59: See page MT−3
R150 (2WD): MT−3
R150F (4WD): MT−6
2. REMOVE CLUTCH COVER AND DISC
(a) Place matchmarks on the flywheel and clutch cover.
(b) Loosen each set bolt one turn at a time until spring tension
is released.
(c) Remove the set bolts, and pull off the clutch cover with the
clutch disc.
NOTICE:
Do not drop the clutch disc.
3. REMOVE BOOT, RELEASE BEARING AND FORK
FROM TRANSMISSION
Remove the boot and release bearing together with the fork and
then separate them.
CL02J−01