Toyota T100 1996 Service Manual page 1648

SST
1996 TOYOTA T100 (RM449U)
BRAKE − BRAKE MASTER CYLINDER
REMOVAL
1. DISCONNECT LEVEL WARNING SWITCH
CONNECTOR
2. TAKE OUT FLUID WITH SYRINGE
NOTICE:
Do not let brake fluid remain on a painted surface. Wash it
off immediately.
3. DISCONNECT BRAKE LINES
Using SST, disconnect the brake lines from the master cylinder
R12875
and 3−way union.
SST
4. REMOVE MASTER CYLINDER
(a) Remove the 4 nuts and 3−way union.
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
(b) Remove the clamp.
(c) w/ ABS:
Remove the check valve bracket.
(d) Remove the master cylinder and gasket from the brake
booster.
R12876
09751−36011
BR−11
BR08U−01