Toyota T100 1996 Service Manual page 1764

SST
SST
1996 TOYOTA T100 (RM449U)
R15215
R04580
Matchmark
R00429
R12979
R04582
STEERING − POWER STEERING GEAR (2WD)
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. REMOVE 2 TURN PRESSURE TUBES
(a) Remove the bolt and clamp plate.
(b) Using SST, remove the tube.
SST 09633−00020
(c) Remove the 2 O−rings from the tube.
2. SECURE PS GEAR ASSEMBLY IN VISE
Using SST, secure the gear assembly in a vise.
SST 09612−00012
3. REMOVE RH AND LH TIE ROD ENDS AND LOCK
NUTS
Place matchmarks on the tie rod end and rack end.
4. REMOVE RH AND LH CLIPS, RACK BOOTS AND
CLAMPS
Using a screwdriver, loosen the clamp.
NOTICE:
Be careful not to damage the boot.
S
Mark the RH and LH boots.
S
5. REMOVE RH AND LH RACK ENDS AND CLAW
WASHERS
(a) Using a chisel and a hammer, unstake the washer.
NOTICE:
Avoid any impact to the steering rack.
SR−57
SR07W−01