SST
1996 TOYOTA T100 (RM449U)
MANUAL TRANSMISSION (W59)
7.
(a)
(b)
(c)
(d)
Q00868
8.
Using SST and a press, install the bearing on the output shaft
with the outer race snap ring groove toward the rear.
HINT:
Hold the 1st gear inner race to prevent it from falling.
9.
WM0122
−
OUTPUT SHAFT
INSTALL LOCKING BALL AND 1ST GEAR ASSEMBLY
Install the locking ball in the shaft.
Apply gear oil to the bearing.
Assemble the 1st gear, synchronizer ring, needle roller
bearing and bearing inner race.
Install the assembly on the output shaft with the synchro-
nizer ring slots aligned with the shifting keys and turn the
inner race to align it with the locking ball.
INSTALL OUTPUT SHAFT CENTER BEARING
SST
09506−35010
INSPECT 1ST GEAR THRUST CLEARANCE
(See page MT−21)
MT−29