Toyota T100 1996 Service Manual page 1339

MT−14
SST
1996 TOYOTA T100 (RM449U)
MANUAL TRANSMISSION (W59)
D00866
SST
WM0046
SST
D00867
− MANUAL TRANSMISSION ASSEMBLY
19. REMOVE OUTPUT SHAFT REAR BEARING AND 5TH
GEAR
(a) Using 2 screwdrivers and a hammer, tap out the snap
ring.
HINT:
At the time of reassembly, please refer to the following item.
Select a snap ring that allows the minimum axial play.
Mark
8
9
10
11
12
13
14
15
(b) Using SST, remove the rear bearing and 5th gear.
SST 09312−20011 (09313−00030, 09313−00040,
09313−00050)
HINT:
At the time of reassembly. please refer to the following item.
Using SST, install the 5th gear and rear bearing.
SST 09312−20011 (09313−00010, 09313−00030,
09313−00040, 09313−00050)
Thickness mm (in.)
2.31 − 2.36 (0.0909 − 0.0929)
2.37 − 2.42 (0.0933 − 0.0953)
2.43 − 2.48 (0.0957 − 0.0976)
2.49 − 2.54 (0.0980 − 0.1000)
2.55 − 2.60 (0.1004 − 0.1024)
2.61 − 2.66 (0.1028 − 0.1047)
2.68 − 2.73 (0.1055 − 0.1075)
2.74 − 2.79 (0.1079 − 0.1098)