Toyota T100 1996 Service Manual page 1749

SR−42
SST
1996 TOYOTA T100 (RM449U)
STEERING − POWER STEERING VANE PUMP (3RZ−FE)
10. INSTALL SPRING, FLOW CONTROL VALVE AND
PRESSURE PORT UNION
(a) Install the valve facing the correct direction.
(See page SR−34)
(b) Coat a new O−ring with power steering fluid and install it
to the union.
(c) Torque the union.
Torque: 83 N·m (850 kgf·cm, 61 ft·lbf)
11. INSTALL OIL RESERVOIR
(a) Coat a new O−ring with power steering fluid and install it
to the oil reservoir.
(b) Install the oil reservoir with the 3 bolts.
Torque:
Front side bolt: 13 N·m (130 kgf·cm, 9 ft·lbf)
Rear side bolts: 24 N·m (240 kgf·cm, 17 ft·lbf)
12. INSTALL VANE PUMP PULLEY
Using SST to stop the pulley rotating, torque the nut.
R09251
SST
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
13. MEASURE PS VANE PUMP ROTATING TORQUE
(See page SR−37)
09960−10010 (09962−01000, 09963−01000)