EM−18
Protrusion
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
3.
(a)
HINT:
If there is only the faintest trace of oil on the seal on the push
rod side, the tensioner is all right.
If leakage is found, replace the tensioner.
P18782
(b)
If the push rod moves, replace the tensioner.
NOTICE:
Never hold the tensioner push rod facing downward.
P18764
(c)
If the protrusion is not as specified, replace the tensioner.
P18770
−
TIMING BELT
INSPECT TIMING BELT TENSIONER
Visually check the seal portion of the tensioner for oil leak-
age.
Hold the tensioner with both hands and push the push rod
strongly as shown to check that it doesn't move.
Measure the protrusion of the push rod from the housing
end.
Protrusion:
10.0 − 10.8 mm (0.394 − 0.425 in.)