Toyota T100 1996 Service Manual page 1244

CH−2
Nippondenso
1996 TOYOTA T100 (RM449U)
CHARGING (5VZ−FE)
When measuring the voltage, however, turn the ignition
S
switch OFF and turn off the electrical systems.
If the voltage is less than the specification, charge the battery.
HINT:
Check the indicator as shown in the illustration.
4. CHECK BATTERY TERMINALS, FUSIBLE LINK AND
FUSES
(a) Check that the battery terminals are not loose or cor-
roded.
(b) Check the fusible link and fuses for continuity.
P15119
5. INSPECT DRIVE BELT
(a) Visually check the belt for excessive wear, frayed cords
etc.
HINT:
Cracks on the ribbed side of the belt are considered acceptable.
If the belt has chunks missing from the ribs, it should be re-
placed.
P06717
(b) Using a belt tension gauge, check the drive belt tension.
Borroughs
Belt tension gauge:
Nippondenso BTG 20 (95506−00020) or
Borroughs No. BT−33−73F
Drive belt tension:
New belt: 160 ± 20 lbf
Used belt: 100 ± 20 lbf
If necessary, adjust the drive belt tension.
Z00038
− CHARGING SYSTEM
Author :
1221
Date :