1996 TOYOTA T100 (RM449U)
BRAKE
−
FRONT BRAKE CALIPER (2WD)
5.
0.5 ton:
REMOVE SLIDING PINS AND DUST BOOTS
(a)
Remove the 2 sliding pins from the torque plate.
(b)
Using a screwdriver and hammer, tap out the 2 dust
boots.
HINT:
At the time of reassembly, please refer to the following item.
Using a 19 mm socket and hammer, tap in 2 new dust boots into
the torque plate.
NOTICE:
At the time of reassembly, please refer to the following
item.
Confirm that the metal plate portion of the dust boot fits
snugly in the torque plate.
BR−29