Toyota T100 1996 Service Manual page 1603

SST
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
5. INSPECT OUTER OIL SEAL
(a) Check for damage.
(b) Check the oil seal lip for wear or damage.
6. REMOVE OUTER OIL SEAL
Using SST, remove the oil seal.
SST
R12256
7. INSPECT REAR AXLE BEARING
SST
Check for wear or damage.
8. REPLACE REAR AXLE BEARING
(a) Using SST and a press, remove the bearing.
SST
SST
SA0541
(b) Using SST and a press, install a new bearing.
SST
SST
SA0536
9. INSTALL NEW OUTER OIL SEAL
Using SST and a hammer, install a new oil seal.
SST
10. INSPECT BEARING CASE
Check for wear or damage.
SST
SA0539
11. REPLACE BEARING CASE
Socket
(a) Remove the oil seal (outer side) and bearing.
Wrench
(b) Install nuts to the serration bolts.
(c) Using a hammer, remove the serration bolts and bearing
case.
(d) Position the backing plate on the new bearing case and
using 2 socket wrenches and a press, install the serration
bolts.
(e) Install a new bearing and oil seal (outer side).
SA0532
− REAR AXLE SHAFT
09308−00010
09223−56010, 09950−60010 (09951−00560)
09950−60010 (09951−00610),
09950−70010 (09951−07150)
09950−60010 (09951−00610),
09950−70010 (09951−07150)
SA−133