Toyota T100 1996 Service Manual page 1686

C
B
1996 TOYOTA T100 (RM449U)
BRAKE
INSTALLATION
Installation is in the reverse order of removal (See page
BR−45).
NOTICE:
Apply lithium soap base glycol grease and high tempera-
ture grease to the parts indicated by the arrows (See page
BR−44).
1.
(a)
A
Adjusting Bolt
(b)
(c)
BR0122
(d)
(e)
BR0973
2.
(a)
If the adjuster does not turn, check for incorrect installation of
the rear brakes.
(b)
(c)
Z03640
(d)
3.
4.
5.
Z03659
− REAR DRUM BRAKE (4WD)
ADJUST BELLCRANK
Lightly pull the bellcrank in direction A until there is no
slack at part B.
In this condition, turn the adjusting bolt so that dimension
C will be 0.4 − 0.8 mm (0.016 − 0.031 in.).
Lock the adjusting bolt with the lock nut.
Connect the parking brake cable to the parking brake bell-
crank and install the clip.
Install the tension spring.
CHECK OPERATION OF AUTOMATIC ADJUSTING
MECHANISM
Move the parking brake lever of the front shoe back and
forth. Check that the adjuster turns.
Adjust the adjuster length as short as possible.
Install the brake drum.
Pull the parking brake lever all the way up until a clicking
sound can no longer be heard.
CHECK CLEARANCE BETWEEN BRAKE SHOES AND
DRUM (See page BR−43)
Shoe clearance: 0.6 mm (0.024 in.)
FILL BRAKE RESERVOIR WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM (See Page BR−4)
CHECK FOR LEAKS
BR−49
BR09Q−01