Toyota T100 1996 Service Manual page 875

Cylinder Head Side
Intake Air Connector Side
LH Side
RH Side
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
If the oil clearance is greater than maximum, replace the lifter.
If necessary, replace the cylinder head.
23.
(a)
If warpage is greater than maximum, replace the intake man-
ifold.
Z14655
(b)
If warpage is greater than maximum, replace the exhaust man-
ifold.
Z14656
(c)
If warpage is greater than maximum, replace the air intake
chamber or intake air connector.
P21621
− CYLINDER HEAD
INSPECT INTAKE MANIFOLD, EXHAUST MAN-
IFOLDS, AIR INTAKE CHAMBER AND INTAKE AIR
CONNECTOR
Intake Manifold:
Using precision straight edge and thickness gauge, mea-
sure the surfaces contacting the cylinder head and intake
air connector for warpage.
Maximum warpage:
0.10 mm (0.0039 in.)
Exhaust Manifolds:
Measure the surfaces contacting the cylinder head for
warpage.
Maximum warpage:
1.00 mm (0.0394 in.)
Air Intake Chamber and intake air connector:
Measure the surfaces contacting the intake manifold and
intake air connector for warpage.
Maximum warpage:
0.10 mm (0.0039 in.)
EM−47