Toyota T100 1996 Service Manual page 885

: Semi−Circular Plug
Front
: Seal Packing
Front
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
(c)
P21206
11.
(a)
(b)
(c)
12.
(a)
(b)
P00827
13.
Install 2 new gaskets and the crossover pipe with the 6 nuts.
14.
15.
(a)
(b)
(c)
P21195
− CYLINDER HEAD
Install the 4 semi−circular plugs to the cylinder heads.
INSTALL CYLINDER HEAD COVERS
Apply seal packing to the cylinder heads as shown in the
illustration.
Seal packing:
Part No. 08826−00080 or equivalent
Install the gasket to the cylinder head cover.
Install the cylinder head cover with the 8 bolts. Uniformly
tighten the bolts in several passes. Install the 2 cylinder
head covers.
Torque: 6 N·m (60 kgf·cm, 53 in.·lbf)
INSTALL RH AND LH EXHAUST MANIFOLDS
Install 2 new gaskets, the RH and LH exhaust manifolds
with the 12 nuts.
Torque: 40 N·m (400 kgf·cm, 30 ft·lbf)
Install the exhaust manifold heat insulators with the 6
nuts.
Torque: 8 N·m (80 kgf·cm, 71 in.·lbf)
INSTALL EXHAUST CROSSOVER PIPE
Torque: 45 N·m (450 kgf·cm, 33 ft·lbf)
INSTALL GENERATOR BRACKET
Torque: 18.5 N·m (185 kgf·cm, 13 ft·lbf)
INSTALL OIL DIPSTICK AND GUIDE
Install a new O−ring to the dipstick guide.
Apply soapy water to the O−ring.
Push in the dipstick guide end into the guide hole of the
oil pan.
EM−57