Toyota T100 1996 Service Manual page 1723

SR−16
Screw Extractor
1996 TOYOTA T100 (RM449U)
STEERING − NON−TILT STEERING COLUMN
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. REMOVE COLUMN UPPER BRACKET AND COLUMN
UPPER CLAMP
(a) Using a centering punch, mark the center of the 2 ta-
pered−head bolts.
(b) Using a 3 − 4 mm (0.12 − 0.16 in.) drill, drill into the 2 bolts.
(c) Using a screw extractor, remove the 2 bolts.
R11777
2. REMOVE MAIN SHAFT ASSEMBLY
(a) Using a snap ring expander, remove the snap ring from
the shaft assembly.
(b) Tap out the shaft assembly from the column tube.
(c) Using a snap ring expander, remove the snap ring from
the shaft assembly.
SR078−01