Toyota T100 1996 Service Manual page 1072

TEMPERATURE °C (°F)
1996 TOYOTA T100 (RM449U)
SFI (5VZ−FE)
Ohmmeter
Acceptable
Z02917
− ENGINE COOLANT TEMPERATURE (ECT) SENSOR
6. INSPECT ECT SENSOR
Using an ohmmeter, measure the resistance between the ter-
minals.
Resistance:
Refer to the graph
If the resistance is not as specified, replace the ECT sensor.
7. REINSTALL ECT SENSOR
(a) Install a new gasket to the ECT sensor.
(b) Using a 19 mm deep socket, install the ECT sensor.
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
(c) Connect the ECT sensor connector.
8. REINSTALL FUEL PIPE
Install the fuel pipe with 4 new gaskets and the 2 union bolts.
Torque: 34.3 N·m (350 kgf·cm, 25 ft·lbf)
9. REINSTALL NO.2 TIMING BELT COVER
Torque: 9 N·m (90 kgf·cm, 80 in.·lbf)
10. RECONNECT UPPER RADIATOR HOSE TO WATER
OUTLET
11. REFILL WITH ENGINE COOLANT
SF−53