Toyota T100 1996 Service Manual page 1211

ST−4
1996 TOYOTA T100 (RM449U)
STARTING (5VZ−FE) − STARTER
DISASSEMBLY
1. REMOVE FIELD FRAME AND ARMATURE
(a) Remove the nut, and disconnect the lead wire from the
magnetic switch terminal.
Torque: 5.9 N·m (60 kgf·cm, 52 in.·lbf)
P20446
(b) Remove the 2 through bolts.
Torque:
1.2 kW, 1.4 kW type: 5.9 N·m (60 kgf·cm, 52 in.·lbf)
1.8 kW type:
P20444
(c) Pull out the field frame with the armature from the magnet-
ic switch assembly.
NOTICE:
At the time of reassembly, please refer to the following
item.
Align the protrusion of the field frame with cutout of the
magnetic switch.
(d) Remove the O−ring.
HINT:
P20443
At the ime of reassembly, please refer to the following item.
Use a new O−ring.
2. REMOVE STARTER HOUSING, CLUTCH ASSEMBLY
AND GEAR
(a) Remove the 2 screws.
Torque:
1.2 kW, 1.4 kW type: 5.9 N·m (60 kgf·cm, 52 in.·lbf)
1.8 kW type:
P20441
9.3 N·m (95 kgf·cm, 82 in.·lbf)
9.3 N·m (95 kgf·cm, 82 in.·lbf)
ST038−04