Toyota T100 1996 Service Manual page 1293

MANUAL TRANSMISSION (R150, R150F)
1996 TOYOTA T100 (RM449U)
−
DISASSEMBLY
1. REMOVE BACK−UP LIGHT SWITCH
Torque: 44 N·m (450 kgf·cm, 32 ft·lbf)
2. 2WD:
REMOVE SPEEDOMETER DRIVEN GEAR
Remove the driven gear lock plate set bolt and driven gear.
Torque: 11 N·m (115 kgf·cm, 8 ft·lbf)
3. REMOVE CLUTCH HOUSING FROM TRANSMISSION
CASE
Remove the 9 bolts and clutch housing from the transmission
case.
Torque: 36 N·m (370 kgf·cm, 27 ft·lbf)
4. REMOVE CONTROL SHIFT LEVER RETAINER
(a) Remove the 6 (2WD) or 4 (4WD) bolts.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
(b) Remove the retainer and gasket (2WD) or oil deflector
(4WD).
5. REMOVE 2 RESTRICT PINS
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
6. 2WD:
FIPG
REMOVE EXTENSION HOUSING
(a) Remove the shift lever housing set bolt.
Torque: 38 N·m (390 kgf·cm, 28 ft·lbf)
(b) Remove the 10 bolts.
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
(c) Using a plastic hammer, tap the extension housing, re-
move the shift lever housing and shift and select lever.
FIPG:
Q06902
Part No. 08826 − 00090, THREE BOND 1281 or
equivalent
MANUAL TRANSMISSION ASSEMBLY
MT−13
MT04R−01