Manual Transmission Unit Removal - Toyota T100 1996 Service Manual

MT−4
1996 TOYOTA T100 (RM449U)
MANUAL TRANSMISSION (W59)
REMOVAL
1.
2.
Remove the 4 bolts, 2 nuts and rear end plate.
3.
Remove the 2 bolts and starter.
D10954
4.
(a)
(b)
HINT:
At the time of installation, please refer to the following item.
Align the input shaft spline with the clutch disc and install the
transmission to the engine.
D10955
5.
Remove the 4 bolts and engine rear mounting.
− MANUAL TRANSMISSION UNIT
REMOVE TRANSMISSION WITH ENGINE (See page
EM−65)
REMOVE REAR END PLATE
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
REMOVE STARTER
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
REMOVE TRANSMISSION FROM ENGINE
Remove the 3 transmission mounting bolts from the en-
gine.
Torque: 72 N·m (730 kgf·cm, 53 ft·lbf)
Pull out the transmission toward the rear.
REMOVE ENGINE REAR MOUNTING
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
MT0ES−01