Toyota T100 1996 Service Manual page 1262

25 mm (0.98 in.) or more
Full Stroke
End Position
Clutch
Start Switch
8 ± 0.5 mm
(0.31 ± 0.020 in.)
1996 TOYOTA T100 (RM449U)
CLUTCH
(d) Gradually depress the clutch pedal and measure the
stroke distance from the point the gear noise stops (re-
lease point) up to the full stroke end position.
Standard distance:
Release
25 mm (0.98 in.) or more
Point
(From pedal stroke end position to release point)
If the distance not as specified, perform the following operation.
CL0512
6. CHECK CLUTCH START SYSTEM
(a) Check that the engine does not start when the clutch ped-
al is released.
(b) Check that the engine starts when the clutch pedal is fully
depressed.
If necessary, replace the clutch start switch.
Q02465
7. CHECK CONTINUITY OF CLUTCH START SWITCH
Check the continuity between terminals when the switch is ON
and OFF.
If continuity is not as specified, replace the switch.
Q00617
− CLUTCH PEDAL
Check pedal height.
S
Check push rod play and pedal freeplay.
S
Bleed the clutch line.
S
Check the clutch cover and disc.
S
Switch position
ON (pushed)
OFF (free)
Author :
CL−3
Condition
Continuity
No Continuity
Date : 1238