Toyota T100 1996 Service Manual page 882

EM−54
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
(f)
P21203
(g)
(h)
P21197
(i)
(j)
(k)
(l)
P21142
(m)
P21204
(n)
(o)
(p)
P21205
− CYLINDER HEAD
Install the 5 bearing caps in their proper locations.
Apply a light coat of engine oil on the threads and under
the heads of the bearing cap bolts.
Install and uniformly tighten the 10 bearing cap bolts, in
several passes, in the sequence shown.
Torque: 16 N·m (160 kgf·cm, 12 ft·lbf)
Install the exhaust camshaft.
Apply new engine oil to the thrust portion and journal of
the camshaft.
Align the timing marks (2 dot marks) of the camshaft drive
and driven gears.
Place the exhaust camshaft on the cylinder head.
Install the 4 bearing caps in their proper locations.
Apply a light coat of engine oil on the threads and under
the heads of the bearing cap bolts.
Install and uniformly tighten the 8 bearing cap bolts, in
several passes, in the sequence shown.
Torque: 16 N·m (160 kgf·cm, 12 ft·lbf)
Remove the service bolt.