Toyota T100 1996 Service Manual page 930

EM−102
No. 1
22 mm
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
3.
(a)
(b)
P00592
4.
HINT:
Others
S
S
20 mm
P10205
(a)
(b)
P10214
5.
Install the thrust washers under the No.2 journal position of the
cylinder block with the oil grooves facing outward.
6.
P10215
7.
(a)
EM5354
− CYLINDER BLOCK
INSTALL BEARINGS
Align the bearing claw with the groove of the connecting
rod or connecting cap.
Install the bearings in the connecting rod and connecting
rod cap.
INSTALL MAIN BEARINGS
Main bearings come in widths of 20 mm (0.79 in.) and 22
mm (0.87 in.). Install the 22 mm (0.87 in.) bearings in the
No.1 cylinder block journal position with the main bearing
caps. Install the 20 mm (0.79 in.) bearings in the other
positions.
Upper bearings have an oil holes lower bearings do not.
Align the bearing claw with the claw groove of the main
bearing cap or cylinder block.
Install the bearings in the cylinder block and main bearing
cap.
INSTALL UPPER THRUST WASHERS
PLACE CRANKSHAFT ON CYLINDER BLOCK
PLACE MAIN BEARING CAP AND LOWER THRUST
WASHERS ON CYLINDER BLOCK
Install the thrust washers on the No.2 journal position of
the bearing cap with the grooves facing outward.