Toyota T100 1996 Service Manual page 1727

SR−20
Intermediate Shaft Assembly
Intermediate Shaft Assembly
Sliding w/ shaft York Sub−Assembly
R12250
R12251
R12252
1996 TOYOTA T100 (RM449U)
STEERING
A
Matchmarks
Sliding w/ shaft
York Sub−Assembly
B
C
Z16081
− NON−TILT STEERING COLUMN
INSTALLATION
1. A/T:
INSTALL STEERING COLUMN ASSEMBLY
(a) Install the control shaft assembly to the steering column
assembly.
(b) Torque the 2 steering column assembly set bolts and
nuts.
Torque: 25 N·m (260 kgf·cm, 19 ft·lbf)
(c) Temporarily install the 2 control shaft assembly set bolts.
(d) Install the control shaft lever with the bolt.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
(e) Install a new locking wire.
2. M/T:
INSTALL STEERING COLUMN ASSEMBLY
Torque the 2 steering column assembly set bolts and nuts.
Torque: 25 N·m (260 kgf·cm, 19 ft·lbf)
3. INSTALL INTERMEDIATE SHAFT ASSEMBLY AND
SLIDING w/ SHAFT YORK SUB−ASSEMBLY
Temporarily install the bolt B and C.
4. CONNECT INTERMEDIATE SHAFT ASSEMBLY
(a) 2WD:
Align the matchmarks on the intermediate shaft and con-
trol valve assembly.
(b) 4WD:
Align the matchmarks on the intermediate shaft and worm
gear valve body assembly.
(c) Torque the bolt C.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
(d) Torque the bolt A.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
(e) Torque the bolt B.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
5. A/T:
CONNECT AND ADJUST INTER LOCK (See page
AT−25)
6. A/T:
TORQUE 2 CONTROL SHAFT ASSEMBLY MOUNTING
BOLTS
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
7. A/T:
CONNECT PARKING LOCK CABLE (See page
AT−23)
8. INSTALL SPIRAL CABLE (See page BE−15)
SR07B−01