Display Memory - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Parameters
fan-id: ID number of a fan.
Description
Use the display fan command to view the working state of the built-in fans.
You can check whether the fans are working normally through the command.
Examples
# Display the working state of the fans.
<H3C> display fan
Fan 1 State: Normal
The above information indicates that fan works normally.

3.1.10 display memory

Syntax
display memory [ slot slot-number | limit ]
View
Any view
Parameters
slot slot-number Specifies a slot number, the usage state of the memory on the slot will
be displayed.
limit: Displays the memory configuration information of the device.
Description
Use the display memory command to display the memory usage of a specified switch.
Examples
# Display the memory usage on slot 0 of the switch.
<H3C> display memory slot 0
System Total Memory(bytes): 197932416
Total Used Memory(bytes): 65234704
Used Rate: 32%
Chapter 3 Device Management Commands
3-7