Subslot 1:
Subslot 2:
Power
1:
Power
2:
display fan
Syntax
display fan [ unit unit-id [ fan-id ] ]
View
Any view
Parameter
unit-id: Unit ID of a switch.
fan-id: ID number of a fan.
Description
Use the display fan command to view the working states of fans in a switch.
Note that only PoE-enabled S3100 series Ethernet switches support this command currently.
Example
# Display the working states of the fans.
<Sysname> display fan
Unit 1
Fan
1 State: Normal
Fan
2 State: Normal
Fan
3 State: Normal
Fan
4 State: Normal
The above information indicates that the four fans of the switch works normally.
display memory
Syntax
display memory [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
Description
Use the display memory command to display the memory usage of a specified switch.
Normal Temperature
Normal Temperature
Normal Temperature
Normal Temperature
3-5