Display Memory - H3C S3100-52P Command Manual

Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Description
Use the display fan command to view the working state of the built-in fans.
Example
# Display the working state of the fans.
<H3C> display fan
Unit 1
Fan 1 State: Normal
The above information indicates that fan work normally.

3.1.7 display memory

Syntax
display memory [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch.
Description
Use the display memory command to display the memory usage of a specified switch.
Example
# Display the memory usage of this switch.
<H3C> display memory
Unit 1
System Available Memory(bytes): 36191232
System Used Memory(bytes): 13143716
Used Rate: 36%
Table 3-3 Description on the fields of the display memory command
System
Memory(bytes)
System Used Memory(bytes)
Used Rate
Field
Available Available memory size of the system, in unit of
bytes
Used memory size of the system, in unit of bytes
Percentage of the used memory
Chapter 3 Device Management Commands
Description
3-5