Delete Vtap Vm; Display Comware-Memory - H3C MSR 810 Command Reference Manual

Usage guidelines
If you use this command on a running VM, you must restart the VM for the configuration to take effect.
If you use this command on a stopped VM, the configuration takes effect after you start the VM.
To obtain the ID of the PF or VF to be removed, use the
Examples
# Remove VF 0 from VM centos7.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] delete sriov vm centos7 pf 0 vf 0
Related commands
display vminterface

delete vtap vm

Use
delete vtap vm
Syntax
delete vtap vm vm-name mac mac-address
Views
VMM view
Predefined user roles
network-admin
Parameters
: Specifies a VM by its name. The
vm-name
characters.
mac mac-address
hexadecimal string in the format of xxxx-xxxx-xxxx.
Usage guidelines
If you use this command on a running VM, you must restart the VM for the configuration to take effect.
If you use this command on a stopped VM, the configuration takes effect after you start the VM.
To obtain the MAC address of a vTap NIC to be removed, use the
command.
Examples
# Remove a vTap NIC from VM centos7.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] delete vtap vm centos7 mac 0010-1110-5872
Related commands
display vminterface

display comware-memory

Use
display comware-memory
the Comware system.
to remove a vTap NIC from a VM.
: Specifies a vTap NIC by its MAC address. The
to display the minimum amount of physical memory available for
display vminterface
argument is a case-sensitive string of 1 to 30
vm-name
8
command.
argument is a
mac-address
display vminterface